Ansoft Pittsburgh | Ansoft Boston | Ansoft San Jose

Driving Directions to Ansoft Pittsburgh

FROM THE PITTSBURGH INT'L AIRPORT

(Approx. 20 miles from the Pgh Int'l Airport to Station Square) From the airport, take Interstate 279 toward Pittsburgh. (This highway is also known as the Parkway West.) Follow the Parkway for approximately 15 miles to the West End exit. (This is the very last exit prior to entering the Fort Pitt Tunnels). Follow this road to the light, stay in the right hand lane travel under the railroad overpass and bear right onto Carson Street. At this point, you will be able to see the city on your left. Continue on Carson Street to the third stop light and make a left. The parking garage will be on your left and the Sheraton Hotel will be straight ahead. Ansoft is located in the Commerce Court Building directly across from the parking garage and the Sheraton.

FROM I-79

Follow I-79 to I-279 (Pittsburgh). Continue following the above directions from the West End Exit.

FROM THE PENNSYLVANIA TURNPIKE

Exit the Turnpike at Pittsburgh Exit ##6 and follow the signs to Interstate Route 376/76 toward Pittsburgh. (This route is also known as the Parkway East.) You will travel approximately 11 miles, through the Squirrel Hill Tunnel, to the Grant Street Exit. (If you go through a second set of tunnels, you have gone too far.) Take the Grant Street Exit from the left lane of the Parkway East. Turn left at the first light and proceed in the left lane to the next light, Smithfield Street. Turn left at Smithfield Street and onto the bridge. After you have reached the end of the bridge, make a right hand turn at traffic light. Travel a short distance to another traffic light, make right. The parking garage will be on your left and the Sheraton Hotel will be straight ahead. Ansoft is located in the Commerce Court Building directly across from the parking garage and the Sheraton.

Driving Directions to Ansoft Boston

From Logan Airport only:

From the airport, follow signs to Sumner Tunnel (toward Boston). Stay in left-hand toll lanes - $2 toll. After exiting the tunnel, follow signs for I-93 North. Follow direction for points east below.

All other points East begin here:

1. Take I-93 North to Exit 37B - Route 128 S and I-95 S.
2. Take I 95/Route 128 South to Exit 33B (Route 3A - Burlington).
3. At end of the exit ramp, go straight through the lights, onto Burlington Mall Road.
4. Go through one set of lights (Marriott Hotel entrance is on the left at the lights).
5. Turn left after light into 25 Burlington Mall Road.
6. Take first right into parking lot. Parking is free and available to all Ansoft/ MicroTek clients and guests.
7. Enter building through main door. You will be entering on the 2nd Floor.
8. MicroTek is located on this floor, it is the upper of the two lobby levels.

From Manchester Airport:

Driving from the Manchester Airport to our facility is fairly easy. First follow the signs for 293 South. Then take 293 South to 93 South and then follow our directions below ("From the North"). The distance from the Manchester Airport to our office is about 45 miles.

From the North:

1. Take I 95/Route 128 South to Exit 33B (Route 3A - Burlington).
2. At end of the exit ramp, go straight through the lights, onto Burlington Mall Road.
3. Go through one set of lights (Marriott Hotel entrance is on the left at the lights).
4. Turn left after light into 25 Burlington Mall Road.
5. Take first right into parking lot. Parking is free and available to all Ansoft clients and guests.
6. Enter building through main door. You will be entering on the 2nd Floor.
7. Microtek is located on this floor; it is the upper of the two lobby levels.

From the South:

1. Take I 95/Route 128 North to Exit 33B (Route 3A - Burlington).
2. The cloverleaf will take you back under the highway.
3. At your first light, turn Left onto Burlington Mall Road.
4. Go through one set of lights (Marriott Hotel entrance is on the left at the lights).
5. Turn left after light into 25 Burlington Mall Road.
6. Take first right into parking lot. Parking is free and available to all MicroTek clients and guests.
7. Enter building through main door. You will be entering on the 2nd Floor.
8. Microtek is located on this floor; it is the upper of the two lobby levels.

From points West:

1. Take 90 (Mass Turnpike) East or Route 3 S to I 95/Route 128 North.
2. Follow directions from South (above).

Driving Directions to Ansoft San Jose

From Mineta-San Jose International Airport

• Start going towards the AIRPORT EXIT on AIRPORT PKY - go 0.3 mi
• Turn on OLD BAYSHORE HWY - go 0.5 mi
• Take US-101 SOUTH towards LOS ANGELES - go 0.5 mi
• Take the I-880 SOUTH exit towards LOS GATOS/SANTA CRUZ - go 3.8 mi
• Take the I-280 exit towards DOWNTOWN SAN JOSE/SAN FRANCISCO -
• Continue on I-280 NORTH ramp towards SAN FRANCISCO - go 0.3 mi
• Merge on I-280 NORTH - go 2.7 mi
• Take the LAWRENCE EXPWY exit - go 0.5 mi
• Merge right on LAWRENCE EXPY - go 0.4 mi
• Make a left turn onto LAWRENCE EXPY - go 0.5 mi
• Go under the Lawrence Expressway overpass
• Turn left at the traffic signal into 5300 Stevens Creek Blvd parking lot (Merrill Lynch sign on building-triangle shape building)
• Ansoft is located on the 6th floor – Suite ##650